Freikometer motherboard with WLM54G WiFi card in its miniPCI slot. The main antenna cable is marked with a cable tie on the RP-SMA end, because we connect that cable to the outside antenna enlarge 138kb print 5327kb
The antenna cables tied down to the hole on the motherboard enlarge 126kb print 4408kb
The motherboard screwed in with the antenna cables running around the standoffs for the amplifier enlarge 112kb print 4570kb
The amplifier and its cables tied up with the WiFi antenna cables. The IN1 and OUT1 are right (red) and the IN2 and OUT2 are left (white). The IN/OUT cables are quite fine so we double them over before screwing them down. enlarge 126kb print 4837kb
The power cable and M9 cables tied down and installed. The power connector is quite heavy so it needs to be cabled tied well. The MMCX connector is quite fragile so it is not cable tied too closely to the board. enlarge 107kb print 3868kb
View of all the cables tied down. enlarge 132kb print 5025kb
Freikometer motherboard with WLM54G WiFi card in its miniPCI slot. The main antenna cable is marked with a cable tie on the RP-SMA end, because we connect that cable to the outside antenna
The antenna cables tied down to the hole on the motherboard
The motherboard screwed in with the antenna cables running around the standoffs for the amplifier
The amplifier and its cables tied up with the WiFi antenna cables. The IN1 and OUT1 are right (red) and the IN2 and OUT2 are left (white). The IN/OUT cables are quite fine so we double them over before screwing them down.
The power cable and M9 cables tied down and installed. The power connector is quite heavy so it needs to be cabled tied well. The MMCX connector is quite fragile so it is not cable tied too closely to the board.
View of all the cables tied down.
